![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-17.png)
For more info see for example here.
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-18-1024x646.png)
This is my new electric bike and I’m very satisfaction of it. I did some improvement that you see below.
My bike configured as shown below weight 27 Kg with battery.
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/GlobaleMod-1024x768.jpg)
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/Retro.jpg)
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/ParafangoAnteriore.jpg)
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/DaSopra-Frontale.jpg)
Behind the engine there is a hole from which the sensor wire that senses the wheel turns comes out. I noticed that some dirt was settling here and then I put a adhesive felt cap as shown in the image below.
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/TappoDietroAlMotore.jpg)
Below there is the list of parts that i used.
Cable to tie the bicycle, see also here.
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-26.png)
Electronic anti-theft for bicycle and rear light, see here.
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-21.png)
Bicycle lights and horn, see here
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-23.png)
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/07/immagine-16.png)
Mudguards for mountain bikes, see here
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-24.png)
Waterproof frame bag with phone space and water protection cover, see here.
![](https://www.emcu-homeautomation.org/wp-content/uploads/2021/10/image-22.png)